Ultimate Amiga
Ultimate Amiga Emulation => PSPUAE => Installation & Running Help => Topic started by: Dreedo on January 04, 2012, 02:47:52 PM
-
Hi, I saw the controls FAQ thread that's stickied. But i got a little confused by it.
Basically all I want to do is disable the analog, as there is no option to stop the analog controlling things in PSPUAE, you either have the option to make it control the Mouse, Joystick 0 or Joystick 1. But my Analog stick is damaged, although it can go right and down fine, even if you press up/left on the analog, it won't register. Also it seems to permanently be going slightly to the right, so it messes up my games.
Thanks.
-
Hi, I saw the controls FAQ thread that's stickied. But i got a little confused by it.
Basically all I want to do is disable the analog, as there is no option to stop the analog controlling things in PSPUAE, you either have the option to make it control the Mouse, Joystick 0 or Joystick 1. But my Analog stick is damaged, although it can go right and down fine, even if you press up/left on the analog, it won't register. Also it seems to permanently be going slightly to the right, so it messes up my games.
Thanks.
Pull the cap off and spray a little WD40 inside the analogue stick, then put cap back on, then waggle it back and fore, up and down alot.
This will fix your problem. Try waggling side to side and up and down, before trying the spray trick.
Will also look at adding a disable.
However, if you have latest 6.60 hack, you can go into recovery menu and set disable analog stick to "off". It will then disable it completely.
-
Thanks I'll try the WD-40 thing, think we have some in the garage.
It was doing it about 3 months ago, but it was because the case was loose, so I tightened the screws and the analog stick was more firmly in place and worked perfectly for about a month, then it started again.
I have removed the cap before, but never tried spraying it with WD-40.
Failing that I'll disable it, I wasn't aware of the option before. :)